Sony HVL-F60M Mode D'emploi page 37

3
Change the brightness with the control wheel.
• You can rotate the control wheel or press it up or down to adjust the
brightness of the light to 15 levels.
• The brightness level is shown on the LIGHT screen.
• When the LED light is on, the [ ] (Flash on) indicator on the camera turns off.
(The flash cannot fire when the LED light is on.)
• The LED light goes off when the flashtube is directed downward (10 degree
downward bounce).
Turning off the light
Press the LIGHT button again.
• The LED light goes off and the LCD panel returns to the normal indicator screen.
• The white balance may vary depending on the camera, lens and settings during
shooting. If this happens, set the white balance on the camera.
• Using this flash unit when the subject is too close to the camera may create
multiple shadows of the subject.
• The color temperature varies slightly with brightness adjustments and LED
temperature, so check the white balance before recording.
37
GB