Manual zoom
You can manually set the flash coverage regardless of the focal length of the lens in
use (manual zoom).
1
Press the control wheel up (ZOOM).
2
Rotate the control wheel or press it up or down to
select a setting value, and press the center of the
control wheel to set that value.
• Setting values: 24mm, 28mm, 35mm, 50mm, 70mm, 105mm, AUTO
• If the setting is done manually, the setting value is shown on the zoom
indicator. If it is set automatically, [AUTO] is shown.
• If the flash coverage is set to less than the focal length of the lens in use, the
periphery of the screen darkens.
• The flash coverage of the manual zoom on the LCD panel is the angle of view of
the 35mm-format focal length.
42
GB