Accessory List; Contents Of Delivery; Warning Notices - Weller WECP-20 Manuel D'utilisation

The WELLER Soldering Station WECP-20 complies with the EU Declaration of Conformity
according to the fundamental safety standards of the directive 89/336/EWG,
73/23/EWG and 89/392/EWG.

6. Accessory list

53311099 Soldering iron set MPR-30
53311199 Soldering iron set MLR-21
53312099 Desoldering set WT-50
51305099 Reflow soldering device EXIN-5
52503099 Thermal wire stripper WST-50
52910699 FE 25 soldering iron 25W with device for solder vapour suction
52515399 FE 50 soldering iron 50W with device for solder vapour suction
52609699 Push button adapter for potential equalisation
52911599 Adapter kit for COD version

7. Contents of delivery

Soldering Station WECP-20 antistatic:
Control unit WECP-20 antistatic
Soldering iron LR 21 antistatic
Safety support rack KH-20
Operation manual
Soldering Station WECP-20 COD antistatic:
Control unit WECP-20 COD antistatic
Soldering iron LR21 antistatic
Safety support rack KH-20
Operation Manual
Encoder plug 350°C
Encoder plug 385°C
Picture: Wiring diagram (with error analysis), see page 48+50
Picture: Exploded view, see page 54
Picture: ESD work place, see page 52
WECP20.pm65 20

8. WARNING NOTICES!

1. Keep your work area in proper order.
Always return the soldering tool to its original holder when not in use. Do not bring
combustible materials near the hot soldering tools.
2. Take care for the surroundings.
Don't use the soldering tool in a moist or wet environment.
3. Protect yourself against electrical shocks.
Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.
4. Keep children at a distance.
Don't allow other persons to touch or disturb the soldering tool or cord. Keep other
persons away from your work area.
5. Store your soldering tool in an appropriate place
Unused soldering tools should be stored in a dry location which is out of the reach of
children (some place high or in a locked cabinet). Switch off all unused soldering tools.
6. Do not overload your soldering tool.
Use the soldering tool only with the specified voltage or specified pressure and pressure
range.
7. Use the appropriate soldering tool.
Don't use a soldering tool whose performance is not adequate for your work. Never
use the soldering tool for purposes for which is was not designed.
8. Wear suitable work cloths.
There is a danger of burning yourself with liquid solder. Wear the corresponding
protective clothing in order to protect yourself against burns.
9. Protect your eyes.
Wear protective eyewear. When working with bonding agents, it is particularly important
to observe the warning notices of the bonding agent manufacturer. Protect yourself
against spattering solder. There is a danger of burning yourself with liquid solder.
11.03.2002, 11:19 Uhr
20