ProMinent DULCO Trans 50 PVDF Mode D'emploi page 14

Safety instructions hand nozzle
Safety instructions Hand nozzle
 Transfer clean and uncharged liquids only.
 Do not exceed maximum operating pressure of 2 bar at 60°C.
 When filling into a container, make sure that no excess
pressure will be built up - danger of liquid splashing.
 Do not transfer liquid at high speed to avoid splashing
of liquids.
 Comply with all relevant safety instructions.
Wear appropriate protective clothing.
(face shield, protective gloves, etc.)
 Ensure that the hose is securely fixed to the hosetail.
 Do not mechanically overstress swivel joint. Hand nozzle
is not appropriate for pulling the flexible hose.
To avoid mechanical stress on the hand nozzle,
slightly bend the flexible hose only.
 The hand nozzle may not be used for liquids which are
not compatible with its materials of construction (nozzle housing,
nozzle valve, seal, hose ...). Also confer to resistance chart.
 Never leave the hand nozzle unattended, because
it does not close automatically.
 Before starting operation, check if lever is reset automatically
to starting position.
 The outside condition of the hand nozzle has to be controlled
by regular visible checks. Regularly check swivel joint (hose
connector with o-ring), nozzle housing, outlet tube and safety
handle. These parts are particularly subject to wear and dirt
accumulation.
.
14