Other Terminals; Connecting External Speakers; Connecting Multiple Monitors - Sharp PN-G655U Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Other terminals

PC/AV audio output terminals
• Audio from the equipment connected to the AV audio input
terminals or PC audio input terminal is output. Connect to
the audio input terminals of the connected equipment using
a commercially available audio cable (RCA).
• The audio output varies depending on the input mode
selection. (See page 15.)
• The volume level can be adjusted using the volume
adjustment. (See page 15.)
• Selecting FIXED of "AUDIO OUTPUT" from the OPTION
menu fixes the volume of sound output from the audio
output terminals. (See page 19.)
• Audio signals output from the PC/AV audio output terminals
cannot be adjusted using the AUDIO menu.
PC/AV output terminals
Video signals from PC1 and AV1 can be output to
HDCP-compatible external device. Use this terminal when
you connect multiple monitors in a daisy chain via DVI cable
(commercially available). (See the description on the right.)
Images cannot be output to device that is not
HDCP-compatible.
RS-232C input/output terminals
You can control the monitor from a PC by connecting a
commercially available RS-232C straight cable between this
terminal and the PC. (See page 25.)

Connecting external speakers

Be sure to use external speakers with an impedance of 6 Ω
and a rated input of at least 7 W.
(1)
1. While pushing the tab, insert the tip of the cable.
2. Release the tab.
TIPS
• Be sure to connect the + and - terminals and the left and
right speakers properly.
• Avoid short circuiting the + and - terminals.

Connecting multiple monitors

You can connect multiple monitors (up to 5 monitors) in a
daisy chain by using the PC1/AV1 input terminals and PC/AV
output terminals of this monitor.
Connection example
(2)
Connecting Peripheral Equipment
First monitor
PC/AV output
PC1/AV1 input terminals
terminal
To PC digital RGB output terminal
TIPS
• The length of the signal cables or surrounding environment
may affect the image quality.
• The screen may not display properly when using terminals
other than PC1/AV1 for the input mode. In this case, turn
off the power to all the monitors connected in a daisy chain
and then turn the power on again.
Second monitor
Digital signal (DVI) cables
(commercially available)
shows the signal flow
11
E

Publicité

Chapitres

Table des Matières
loading

Table des Matières