Changing Between Input Terminals; Turning The Power Off - Sharp LL-T19D1 Mode D'emploi

Connecting the monitor and turning the monitor on and off

Changing between input terminals

Use the INPUT button to switch between signal
input terminals.
Analog RGB input terminal 1
Analog RGB input
terminal 2
Note:
- When there is no input signal, [NO SIGNAL] is
displayed.
DVI-D input terminal
13

Turning the power off

1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
Turn the computer
off.
OFF
If the monitor will not be used for a long time, turn
off the main power switch of the monitor, and
remove the power plug from the outlet.
Press power button.