Turning The Power On; Changing Between Input Terminals (Input 1 ↔ 2); Turning The Power Off - Sharp LL-T1810A Mode D'emploi

Connecting the monitor and turning the monitor on and off
2. Connect the USB cable.
USB port: Downstream (2 ports)
USB port: Upstream (1 port)
3. Replace the cover.

Turning the power on

When connecting, ensure that both the monitor and
computer are switched off.
Turn monitor on
Press power button
The power LED
Power LED
Green light: In use
Orange light: Power saving mode or signal
failure
Lamp off: Power OFF
Notes:
- Depending on the computer or OS, it may be
necessary to use the computer to install monitor
set-up information. If so, follow the steps below to
install the monitor set-up information. (p. 15)
- When setting up the monitor or a connected
computer for the first time, connecting an
additional computer or after having changed an
aspect of the current system, perform an
automatic screen adjustment before use (p. 18).
Changing between input terminals
(INPUT 1 ↔
When connected to two computers, use the INPUT
button to switch between input signal terminals (i.e.
to choose which computer's screen you want dis-
played.)
Turn on device to
which monitor is
connected

Turning the power off

CAUTION!
Do not leave the monitor in contact with rubber or
plastic items for long periods of time as this could
lead to color change or change in shape.
14
↔ ↔
↔ 2) ↔
INPUT button
Pushing this button switches between input
signal terminals, so that the screen changes
to display any of the machines connected.
Turn off device
to which monitor
Turn monitor off
is connected
Press power button