Removing The Temporary Stand - Sharp PN-G655U Mode D'emploi

Removing the Temporary Stand

Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper
mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.)
Caution
• The monitor is heavy. It must be handled by 2 or more people.
• This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use
only until the monitor is properly mounted.
1. Hold the monitor with the handles to prevent it
from falling down, and remove the stand fixing
screws (4).
2. Lift the monitor by holding it with the handles and
the underside of the unit.
3. When the installation is complete, attach the
included stand hole protection covers, using the
supplied screws.
(1) Fold the sheet perpendicularly with the
adhesive side inward.
(2) Remove the adhesive cover and attach the
sheet to the monitor.
• The temporary stand is specifically designed for this monitor. Do not use for other devices.
(Rear view)
13
E