Automatic Switch-Off; Keep-Warm Function; Energy Consumption Display; Basic Settings - NEFF T16BT.6 Série Manuel D'utilisation

10 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off.
sidual heat indicator ⁠ / flash alternately on the hot-
plate display.
11 Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
11.1 Switching on the keep-warm function
Select the hotplate.
1.
Touch the symbol.
2.
a lights up on the heat setting display.
12 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
13 Basic settings
You can configure the appliance to meet your needs.
13.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis- Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Audible signal
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
Factory setting
1
and the re-
1
1
10.1 Continuing cooking after automatic
switch-off
Touch any control.
1.
a The display goes out.
Reset.
2.
11.2 Switching off the keep-warm function
Select the hotplate.
1.
Touch the symbol.
2.
lights up on the heat setting display.
a
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→ Page 37
Dis- Selection
play

Energy consumption display

Ask your electricity supplier what the mains
voltage is.
– Consumption display is switched off.
– Consumption display at mains voltage of
230 V.
– Consumption display at mains voltage of
400 V.
– Consumption display at mains voltage of
220 V.
– Consumption display at mains voltage of
240 V.
Automatic timer
– Switched off.
– Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
– 30 seconds.
1
– 1 minute.
1 Factory setting
Automatic switch-off en
1
1
37