Troubleshooting - SilverCrest SHE 3 A1 Mode D'emploi

__KRA106439_B3.book Seite 13 Donnerstag, 14. August 2014 4:53 16
Removal
Press the button 6 and remove the roller holder 2 upwards.
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.

11. Troubleshooting

If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
DANGER!
Do not attempt to repair the device yourself under any
circumstances.
Fault
The device cannot
be switched on.
Increased skin irrita-
tion.
Possible causes/Action
• Are the batteries flat?
• When switching the device on, did
you press the safety button 4 too?
• Check whether the surface of the roller
is undamaged.
13
GB