Toasting; Interrupting The Toasting Process; Warming Function - SilverCrest STC 850 C1 Mode D'emploi

Toasting

CAUTION - RISK OF FIRE!
When the appliance is in operation, do NOT cover the toasting slots 6.
►
There will be a risk of fi re! The appliance could be irreparably damaged!
NOTICE
► If you only want to put one piece of toast into the toaster, turn the toasting
dial 1 down by approx. 1 level to achieve the same level of browning as
with 2 pieces of toast.
1) After setting the desired browning level, insert the bread into the toaster
slots 6.
2) Press the operating button 7 downwards. The automatic bread centring
device centres the inserted bread in the toaster slots 6. During the toasting
process the control lamp integrated in the "Stop" button
3) When the desired level of browning has been reached the toaster switches
itself off automatically, the slices are ejected to the top and the control lamp
goes out.

Interrupting the toasting process

If you wish to interrupt the toasting procedure, press the button "Stop"
The toaster switches itself off and the bread slices are ejected upwards.

Warming function

The warming function enables you to warm bread without browning it. As
an example, for toast that has gone cold. The bread is only briefl y warmed.
1) Insert the bread and press the operating button 7 downwards.
2) Press the "Warm up" button
3) When the bread has been reheated, the appliance switches itself off
automatically and the slices are ejected upwards.
│
■ 32 GB
4. The integrated control lamp lights up.
3 glows.
3.
STC 850 C1