Initializing The Unit - Sony RDP-XA900iPN Mode D'emploi

Initializing the Unit

You can initialize the unit. All settings of the
unit are reset to the factory default settings
when you initialize the unit.
1
Press the ?/1 button to turn on
the unit.
2
Remove the iPod from the
Docking Tray.
3
While holding down VOLUME
–, hold down ?/1. (Hold both
buttons down for at least 5
seconds.)
After resetting, the ?/1 indicator flashes
for 2 seconds.
Tip
You can reset only the network settings of the unit to
the factory default settings using the RESET
(NETWORK) button (page 8).
21
GB