Installing The Speakers - Sony SS-X500A Mode D'emploi

Installing the Speakers

Speaker
Right Speaker
attachment
holes
R L R
Brackets
Panel cover
screws
Left Speaker
L R L R L L
The L-marks must be
aligned side by side.
Bracket
Bracket
attachment
attachment
holes
screws
Install the right/left speakers using the brackets as follows:
1
Match the speaker attachment holes on the speaker to
the speaker attachment holes on the bracket. Attach the
brackets to the speakers with the supplied M5 screws
(black, 3 screws each for left and right holes).
Assemble the left speaker by matching the L-mark of
the speaker to the L-mark of the bracket. (The L-marks
must be aligned side by side.)
Similarly, you can install the right speaker by matching
the R-mark of the speaker to the R-mark of the bracket.
(The R-marks must be aligned side by side.)
2
Loosen the panel cover screws (2 each for right and
left). Open the panel cover.
There are 4 bracket attachment holes to install the
speakers.
3
Insert the supplied M4 screws (gray, 4 screws each for
right and left) into the bracket attachment holes and
temporarily tighten them.
7