Publicité
Les langues disponibles
Les langues disponibles
4.4.7 System with puffer / heat storage
This type of installation requires the use of an external thermostat, which measures the temperature of the puffer.
When the temperature is lowered below the temperature of SET set in the external thermostat, in the stove display
shows the message WATER PUFFER or BOILER WATER and light up the 2 LEDs respectively indicated by the tap
and
from
the
If the stove is in the HOLD step REQUEST automatically turns on and goes into WORK and reached the working
temperature
of
the
SET When the temperature of the puffer is satisfied, the stove is placed in a HOLD REQUEST (it is recommended to
set
the
If the stove is in the OFF state, no lights and does not provide the service.
4.5 Shutting down
To shut down the stove, just press the button 'P4' for about 2 seconds.
The auger is immediately stopped and the fume extractor is brought to high speed, making the message
'CLEANING' appear on the display.
At the end of the operation the message 'OFF' appears in the
dialogue box.
During the shutdown stage the stove cannot be restarted until the
fume temperature has fallen below a set value for a fixed time, with
the message 'WAITING COOL' appearing in the dialogue box.
4.6 Menu
Press the button 'P3' (SET) to access the menu; this is divided into various items and levels for accessing the
settings of the electronic controller.
The following table summarises the menu structure with the selections available to the user.
Level 1
02 – set clock
03 – set chrono
radiator
as
it
water
in
the
camera,
function
ON
Clock
Room temperature
Dialogue box
Level 2
01 - day
02 - hours
03 - minutes
04 - day
05 - month
06 - year
01 – enable chrono
can
meet
the
you
turn
the
water
STAND-BY,
Button 'P4'
Level 3
54
plant
heating
supply
to
the
see
prg.
Room temperature
Water T
Dialogue box
Level 4
Value
Day
Hours
Minutes
Day
Month
Year
TERMO-BLITZ
system.
puffer.
4.6.5).
Publicité
