Display; Remote Diagnostics; About Data Protection; Declaration Of Conformity - Siemens EQ.9 plus connect s700 Mode D'emploi

Display

The top right-hand corner of the display
shows the Home Connect status with a
symbol:
| Connected to the network
Not connected to the network
E
No connection to server
†

Remote diagnostics

Customer Service can use Remote
Diagnostics to access your appliance if
you contact them, have your appliance
connected to the Home Connect server
and if Remote Diagnostics is available
in the country in which you are using the
appliance.
Note:
For further information and
details about the availability of Remote
Diagnostics in your country, please visit
the service/support section of your local
website: www.home-connect.com

About data protection

When the fully automatic coffee
machine is connected for the first time
to a WLAN network which is connected
to the Internet, the appliance transmits
the following categories of data to the
Home Connect server (initial
registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of the fully automatic coffee
machine.
Status of any possible previous
■
resetting to factory settings. This
initial registration prepares the Home
Connect functions for use and is
only required when you want to use
these Home Connect functions for
the first time.
Note:
Please note that the Home
Connect functions can only be used in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby
declares that the appliance which
features Home Connect is in
accordance with the basic requirements
and the other relevant provisions of the
directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.siemens-home.bsh-group.com on
the product page of your appliance with
the additional documents.
2.4 GHz band: max. 100 mW
Home Connect en
71