Setting Up - Siemens EQ.9 plus connect s700 Mode D'emploi

en Home Connect

Setting up

To implement settings via Home
Connect, you must have installed the
Home Connect app on a mobile device
(e.g. tablet PC, smartphone).
When doing so, observe the Home
Connect installation instructions
supplied, which are also available to
download in additional languages at
http://www.siemens-home.com.
Follow the steps specified by the app to
implement the settings.Login of the
appliance in the WLAN network can be
carried out on initial set-up of the fully
automatic coffee machine either directly
or using the menu (press $/± button to
open "Menu"):
1. Turn the rotary selector to the left
and select "Home Connect setting".
Press the rotary selector.
2.
The display shows the Home
3.
Connect menu, with "Turn on Wi-Fi"
highlighted in colour.
Press the right-hand navigation
4.
button under "select" to start the
radio link.
Use the rotary selector to select
5.
"Connect to network".
Press the right-hand navigation
6.
button under "select".
7. The following selection appears:
" Connect automatically" and
" Connect manually".
Note: If the router has WPS
functionality, please select "Connect
automatically", otherwise use "Connect
manually".
68
Automatic registration in the home
network
Use the rotary selector to select
1.
"Connect automatically" on the
display.
Press the right-hand navigation
2.
button under "confirm".
3. The display shows "Automatic
network connection".
Press the WPS button on the home
4.
network router within a few minutes
and wait until the display of the fully
automatic coffee machine shows
"Network connection successful".
Open the app on the mobile device.
5.
Use the rotary selector to select
6.
"Connect to app".
7. Press the right-hand navigation
button under "select". The fully
automatic coffee machine connects
to the app. Follow the instructions on
the app.
8. Wait until "Successfully connected to
app" lights up briefly in the display.
Use the rotary selector to select
9.
"Turn on remote start".
Press the right-hand navigation
10.
button under "select". A warning
message appears.
Press the right-hand navigation
11.
button under "continue" and read the
warning message.
Press the right-hand navigation
12.
button under "confirm".
Press the $/± button to close the
13.
menu. With the mobile device the
functions of the fully automatic
coffee machine can now be used to
their full extent via the app.
Note:
If "Turn off remote start" is
selected, only the modes of the fully
automatic coffee machine are displayed
in the Home Connect app. You can
specify settings but not start drinks
dispensing.