en Operating the appliance
Notes
When the appliance is used for the
■
first time, after running a service
programme or if it has not been
operated for a long period, the first
beverage will not have the full aroma
and should not be consumed.
After starting up the appliance for
■
the first time, you will consistently
achieve a suitably thick and stable
"crema" only after the first few cups
have been dispensed.
If the appliance is in use for a long
■
period of time, water droplets will
form on the ventilation slots. This is
normal.
54
1
Operating the
appliance
I n this section, you will learn how to
O p e r a t i n g t h e a p p l i a n c e
prepare your appliance for beverage
preparation and how to prepare hot
drinks. It features information on
adjusting the beverage settings and
adjusting the grinding level.
Selecting a drink
Use the rotary selector to select the
■
desired beverage.
The display shows the name of the
■
drink and the values currently
selected (e.g. strength or cup size).
The drink selected can be prepared
■
with the pre-set values or first
adjusted to your individual taste.
~ "Adjusting beverage settings"
on page 59 ~ "Menu settings"
on page 64
If no controls are activated within
■
approx. 5 seconds, the appliance
will exit settings mode. The settings
made will be automatically stored.
You can choose from the following
drinks:
Ristretto
Espresso Doppio
Espresso