Sony CLIE GEAR Mode D'emploi page 33

2 Rotate the Jog Dial navigator to select HotSync and press the
Jog Dial navigator on the Application Launcher screen.
The [HotSync] screen is displayed.
You can also tap the [HotSync] icon to display the HotSync screen.
3 Tap the
[Option] menu.
4 Check that correct data is entered in [Primary PC Address] and
[Subnet Mask(optional)], and tap [OK].
5 Tap the
[Option] menu.
6 Tap [Network], and tap [OK].
7 When the HotSync screen appears, tap [Modem], and then tap
[Select Service].
8 Tap V next to [Service], select [Wireless LAN], and tap [Done].
Tip
You do not have to enter a telephone number in [Enter phone #].
Note
It is also necessary to select [Wireless LAN] in [Service] on the [Network] screen
of the [Preferences] that can be started from the home screen.
Performing a HotSync operation
When you have finished preparing your CLIÉ handheld and your
computer, tap the [HotSync] icon on the [HotSync] screen.
Your CLIÉ handheld automatically connects to the network and
begins a HotSync operation.
When communication is not possible
In Step 3 above, erase the [Primary PC Name].
Menu icon, and tap [Primary PC Setup] from the
Menu icon, and tap [Modem Sync Prefs] from the
US
33