Sony CLIE GEAR Mode D'emploi page 25

8
Enter a network ID in [NetworkID (SSID)].
Enter an alphanumeric string of your choice. The same network
ID (SSID) needs to be entered in both your CLIÉ handheld and the
other communication device.
9
Select the encryption level in [WEP].
Make sure you select the same encryption level for both your
CLIÉ handheld and the other communication device.
Tip
When you select [None] in [WEP], you do not need to enter a WEP key. In
this case, skip the next step, and go to Step 11.
Continued on next page
US
25