Department Programming - Sharp XE-A213 Manuel D'instructions

• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added system), it is ignored.
• If you make an incorrect entry before pressing the third
it with the
• You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do
need to enter the decimal for fractions.
• If you select VAT system, the sign which you program is ignored.
To delete a tax rate, use the following sequence:
s
6

Department Programming

Merchandise can be classified into a maximum of 99 departments. Items sold using the department keys can
later be printed on a report shown as the quantities sold and sales amounts classified by department. The data
is useful for making purchasing decisions and other store operations.
Default setting for the VAT/tax statuses and signs are listed below.
Dept. code:
Dept. 1-10
Dept. 11-20
Dept. 21
Dept. 22-99
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the PLU,
procedure except while entering texts or prices, the programming will move to the pressed key
programming.
l
key.
@
9
VAT/tax status:
VAT 1
VAT 2
VAT 1
VAT 1
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
- %
, ,
1
QUICK START GUIDE
Part
@
Tax number (1 to 4)
s
A
is saved.
l
key twice is NOT saved.
V r o X Y c
, , , , ,
Part
key in programming a tax rate, cancel
@ v
Sign:
(+)
(+)
(-)
(+)
key when the corresponding
b
or key in the middle of
2 3
Part
A
17