Briteq BT-36II Mode D'emploi page 3

ENGLISH
OPERATION MANUAL
®
Thank you for buying this BriteQ product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 Powerful LED moving wash for use in discotheques, theater, studio and hiring companies
 Based on 36pcs high power 3Watt LEDs driven at low current for extremely high light output and reliability.
 Improved light output and color balance, via menu option backward compatible with BT36L1
 Infinite colors thanks to high frequency 400Hz RGB color mixing technology which makes it also a perfect
choice in TV studios (no interferences with TV-cameras)
 Easy lens exchange for different beam angles (25° standard + 15° and 45° optional)
 Switchable 8 or 15 DMX channels:
 8 channels: pan * tilt * strobe * red * green * blue * master dimmer * special function
 15 channels: pan * pan fine * tilt * tilt fine * pan/tilt speed * pan/tilt macros * macro speed * special
function * master dimmer * strobe * red * green * blue * color chase/fade * chase/fade speed.
 Can be used in Master/slave mode with music triggered integrated programs and optional CA-8 controller
 Smooth but very fast 540° panning and 270° tilt movements
 Extremely fast strobe function
 Low heat and very low power consumption
 Built-in menus with 4digit LED display
 Compact and stylish enclosure including 1 omega clamp
BEFORE USE
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 BT-36 II unit
 Mains Cable
 1 omega clamp
 Operating instructions
SAFETY INSTRUCTIONS:
CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
BRITEQ
®
OPERATION MANUAL
CAUTION: To reduce the risk of electric shock, do not
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
1/69
ENGLISH
 To protect the environment, please try to recycle the packing material as much as possible.
 A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some
minutes.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it
into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even
cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit, immediately disconnect the mains power.
 Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed
at least 50cm from surrounding walls.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
 Always unplug the unit when it is not used for a longer time or when you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for electrical
and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is
squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 This fixture must be earthed to in order comply with safety regulations.
 Don't connect the unit to any dimmer pack.
 Always use an appropriate and certified safety cable when installing the unit.
 In order to prevent electric shock, do not open the cover. there are no user serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and
electrical specifications!
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering from
epilepsy.
LENS (RE)PLACEMENT
 Switch off the main supply and unplug the unit.
 Remove the 4 screws to open the lens compartment and protective glass( A on the picture below)
 Remove the 4 screws that keep the black lens cover plate in place and remove the metal plate. (B on the
picture)
 GENTLY remove the original lens (C on the picture) DO NOT TOUCH THE LEDs!!!
BT-36 II BRITEQ
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 1 meters
Always unplug the unit before you replace the lenses! DO NOT TOUCH THE LED
LAMPS! HIGH POWER LEDs ARE VERY
ELECTRICITY!!! You can easily destroy the LEDs by simply touching them!
2/69
®
OPERATION MANUAL
SENSITIVE FOR ELECTROSTATIC
BT-36 II