List Of Materials; Parts Not Supplied - Elica EMZ630S3 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
5.4x75 mm
3.5x9.5 mm
4x8 mm
Torx 10 adapter
Tools/Materials required
• Level
• Drill
• 1 ⁄ " (3.2 cm), ⁄ " (3.2 mm), and
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
- Torx 10
6
Pieces
1
6
4
2
4
1
Parts no supplied
⁄ " (4.8 mm) drill bits
1
1 6
Supplied Part
Duct covers
6" round air transition
8x40 mm
10x60 mm
Duct cover bracket
Mounting template
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT
24"
(61 cm)
Recirculating Kit
Long Chimney
Extension
Pieces
2
1
2
4
1
1
# Part
30" 36"
(76.2 cm) (91.4 cm)
KIT0102875
KIT02785