List Of Materials; Parts Not Supplied - Elica ASTI Guide D'utilisation, D'entretien Et D'installation

List of Materials

Removing the packaging�
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges�
Supplied Part
Hood assembly and LED lamps already installed
4.5x13 mm
4.2x15 mm
3.5x9.5 mm
4.2x19 mm
Tools/Materials required
• Level
• Drill with 1¼" (3,2 cm), ⁄ " (3,2 mm), y
1
8
• Pencil
• Pliers
• Tape measure or ruler
• Caulking gun and weatherproof caulking compound
• Saber or keyhole saw
• Metal snips
• Vent clamps
• Screwdrivers:
• Flat-blade
• Phillips
6
I WARNING
Remove the protective film covering the product before
putting into operation�
Pieces
1
Metal spacers (for use when cabinet depth is greater than 12")
8
2
4
8

Parts not supplied

Parts needed
• 6" (15�2 cm) round metal vent system
⁄ " (4,8 mm) drill bits
1
1 6
Supplied Part
Mounting brackets
3.5x9.5 mm
Torx #10 adapter
Ø 6.4x18 mm washers
Ø 6.4x18 mm washers
KIT
Recirculating Kit
Grease filter
Hood Liner KIT02773
Pieces
2
2
6
1
8
8
# Part
KIT02770
GF08PA
KIT02774