Body Fat; Recovery - Tunturi Pure Cross F 4.1 Mode D'emploi

In stop mode, press Body fat key to start
this function.
• Set Gender by using Up/ Down key
and confirm by Mode key.
• Set Age by using Up/ Down key and
confirm by Mode key.
• Set Height by using Up/ Down key
and confirm by Mode key.
• Set Weight by using Up/ Down key
and confirm by Mode key.
After confirm user must grab and hold
both hand pulse sensors.
Note:
If hand grips are grabbed incorrectly,
display cannot read and show
"---- " "
sensors again to see if improves.
When console can read the display will
show a progress bar.
display will show after finished
body fat in percentage and BMI as a
number by turns in every 3 seconds.
Note:
Error codes in body fat program are:
LCD show "----
search for reading
E1: There is no heart rate signal input
detected for at least 5 seconds.
E4: Occurs when FAT% is below 5% or
exceeds 50%. Occurs when BMI result is
below 5 or exceeds 50.
16

Body fat

----". re grab hand pulse
" " ----": hand grips

Recovery

• After exercising for a period of
time, keep holding on hand grips
until display shows the actual pulse
reading.
• Press Recovery key, and re grab
hand grips
• All display functions will stop except
"TIME" that will start counting down
from 00:60 to 00:00.
• LCD will display your heart rate
recovery status with the F1, F2....to
F6.
F1 is the best result and F6 is the worst.
Press the RECOVERY button again to
return the main display.
Note:
During the recovery time, re-press
"RECOVERY" and console will go back
to previous page.