Shut Down; Advanced Menu Controls; Advanced Menu List - DeVilbiss Healthcare IntelliPAP DV51 Standard CPAP Série Mode D'emploi

Appareil de ventilation spontanée en pression positive
Masquer les pouces Voir aussi pour IntelliPAP DV51 Standard CPAP Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADVAnceD menu controls

Shut Down

Press the ON/OFF button to turn the device off. You may also simply remove your mask.
After a few seconds the device will display the message "Mask Off. Please check mask fit." If
you do not put the mask on again the device will automatically turn off in about 20 seconds.
Pressing any button will remove the message from the display.
NOTE–
If the DeVilbiss IntelliPAP does not turn off automatically, the feature may have been disabled. In this
case you must manually turn the device off.
aDVanCeD menU ConTRols
With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through
the items on the display. The table shows the items you may see, and describes the feature
associated with each item.
Name
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.

Advanced Menu List

Display Example
P: 5.0
CPAP
Heat:Off
Set Pressure
10.0 cmH20
Delay Time
45 minutes
Delay Pressure
5.0 cmH20
Enable Menu
Press 
Symbol
Function
Pressing this button displays the previous menu option.
Pressing this button displays the next menu option.
These buttons allow you to adjust the setting that is
shown on the display.
Description
This is the default screen when the IntelliPAP is turned on. The
actual mask pressure and heater setting are shown. The
displayed pressure may vary slightly while breathing. If the
heater system is not connected, the heat setting will be blank.
This is a prescription setting which controls the operating
pressure.
Selectable delay time setting. Your provider has set the delay
time. If the unlocked symbol is shown, you are able to adjust
this setting. If the locked symbol is shown, this setting can only
be adjusted by your provider.
This is a prescription setting which controls the operating
pressure during the delay time.
Pressing the down key enters the Enable menu. Refer to next
section for Enable Menu details.
EN
A-DV51
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Intellipap a-dv51

Table des Matières