Enable Menu List - DeVilbiss Healthcare IntelliPAP DV51 Standard CPAP Série Mode D'emploi

EN
Display Example
LCD Contrast Adj
50 %
Compliance Meter
123456.7 hours
Hourmeter
123456.7 hours
Firmware Version
V0.01 01/06/2006
Serial Number
HD123456
SmartCode
FF28D9

Enable Menu List

The Enable menu is available in all modes and is a sub-menu that allows you to control
various functions of your IntelliPAP . It is accessed by pressing the down button while in this
Advanced Menu.
Display Example
Auto-ON
Enabled
Auto-OFF
Enabled
Exit Menu
Press 
A-DV51
12
ADVAnceD menu controls
Description
This setting changes the contrast for the LCD display. This only
needs to be adjusted if you find it difficult to see the display
from your viewing angle.
The total number of hours (in 1/10 hour increments) that the
IntelliPAP has been providing therapy.
The total number of hours (in 1/10 hour increments) that the
IntelliPAP has been in operation.
Shows version of installed firmware.
Shows the serial number of the
SmartCode is used for therapy management reporting;
TM
therapy information is encoded in a series of letters and
numbers, and includes a special character for error checking to
ensure accuracy.
Description
This option controls the Auto-ON feature, which automatically
starts the flow of air after breathing once or twice into the
mask.
This option controls the Auto-OFF feature, which
automatically stops the flow of air after taking off the mask.
The device may require up to 30 seconds to turn OFF
depending on the kind of mask used.
Pressing the up key exits the Enable menu.
device.