Assembling The Stand; Stand Installation - Brandt B4302UHD LED Manuel D'utilisation

Assembling the stand

(Model: B4302UHD LED, B4502UHD LED, B4902UHD LED)
NOTE:
Assure the AC cord is not connected to an AC outlet.
Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
Do not touch or press the TV screen, the glass might break under pressure.
1. Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert and secure the stands (R and L) with 2 screws (supplied) each side as shown.
3. be sure to follow the above instructions. Insufficient tightening or incorrect installation
of the stand will not support your TV correctly, and could result in damage or injury from
tip-over.

Stand Installation

6