Brandt B4302UHD LED Manuel D'utilisation page 24

Menu Operation
Frequency, Symbol and Modulation values are needed in
order to add a programme correctly in DVB cable mode.
Please inquire of the cable service provider about the
correct values. When setting is completed, select Search
and press the OK button to start channel tuning.
When TV signals is Satellite.
Auto Tuning: Press the OK button to enter sub-menu.
– Country: Press the
– Search: Press the OK button to enter search settings.
• Satellite: Press the
• Transponder: Press the
• Scan Mode: Press the
• Service Type: Select the service type to search.
• Scan Type: Press the
• Search: When you are satisfied with your setting, press the OK/
TV will begin memorizing all of the available channels.
Satellite Settings
– Satellite/Transponder: Press the
the Satellite/Transponder and press the OK/
Press the / button to select the satellite/transponder
from the list.
– LNB Power: Select the power supply type for the LNB.
– LNB Type: Select the LNB type.
Press the OK button access the submenu. Items can be
adjusted when the LNB Type is set to Universal Mode.
– 22kHz Tone: 22KHz SWITCH. Select the 22KHz
depending on the LNB type.
– Toneburst: You can choose one of two satellites. Used
to choose proper device.
– DiSEqC1.0: You can choose one of four satellites. Used to choose proper device.
– DiSEqC1.1: You can choose one of sixteen satellites. Used to choose proper
device.
– Motor: Sets the positioned type between DiSEqC1.2 and DiSEqC1.3.
When motor is set to DiSEqC1.2 or DiSEqC1.3:
Set position: Press the red button to set position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Store Position: Store current position as the selected positioner limit.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
: Manual store for digital channels.
/ button to select country.
/ button to select the satellite.
/ button to select the transponder.
/ button to select the scan mode.
/ button to select FAST SCAN or BLIND SCAN.
/
21
button to select
button.
button. The