Menu Operation
HDMI_CEC: Press the OK / button to enter the submenu. The HDMI_CEC system
can be used only with devices that have the HDMI_CEC feature. You must connect
an HDMI_CEC device using an HDMI cable. Some HDMI cables may not support
HDMI_CEC functions.
– HDMI_CEC: Switch the HDMI_CEC function On or Off.
– Auto Standby: Switch the Auto Standby function On or Off.
– ARC: Switch the ARC function On or Off.
– Auto Power on: Switch the Auto Power on function On or Off.
HDMI EDID (In HDMI mode): Switch EDID Version, Select EDID2.0 when source
signal is transferred by HDMI2.0 specification and Select EDID1.4 when source
signal is transferred by HDMI1.4 specification.
App Settings: Display information about the Netflix.
Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
HBBTV: Switch the HBBTV function On or Off.
NOTE:
This service may be supported in other countries.
Some broadcasting may not support the HBBTV.
An application on HBBTV may malfunction temporarily depending on the
circumstances of the broadcast station or application provider.
An application is only available for use on HBBTV when the TV network is
connected to an external network. The application may malfunction depending on
the network conditions.
Configuring the Lock Menu
Lock System: The feature can prevent unauthorized operating the TV set, unless
entering 4-digit password.
Press 0-0-0-0 using Direct Channel Selection Buttons (0-9). (This is default
password.)
NOTE:
If you forget your password, use the factory password 1-2-2-5, you can then gain
access to change your password if necessary.
Set Password: Press the OK button to enter submenu.
You can set your private password. Press the number buttons on the remote control
to set the new password. When the new password has been input twice, the setting
is finished successfully. The TV will go back to previous menu.
This is an installation guide to help you to setup the TV.
33