Configuring The Channel Menu - Brandt B4302UHD LED Manuel D'utilisation

Menu Operation

Configuring the Channel Menu

Selecting an antenna source.
When TV signals is Air.
: Press the OK button to
enter sub-menu.
– Tune Type: Press the
select tune type: DTV+ATV, DTV, ATV.
– Country: Press the
select country.
– Search: Press the OK/
start the auto searching.
Once the progress bar is full, the found
channels will be stored and the unit
will proceed to the search for DTV, TV, Radio and Data.
If you press the MENU ( ) button in TV searching, the Auto Tuning will skip to DTV
searching as the suggestive picture shows.
channels.
1. Press the /
2. Press the OK button to start channel tuning.
When a channel is found, the searching
process will stop; the channel will be saved with
current channel number. Press the EXIT (
button to exit.
When TV signals is Cable.
: Press the OK button to enter sub-menu.
– Tune Type: Press the
– Operator: Press the
– Country: Press the
– Search: Press the OK button to enter search settings.
• Tuning Mode: Press the / button to select Tuning Mode: Full or Quick.
– If you select Full, the Auto Tuning will search through all frequencies to find
available channels.
– If you select quick, the Auto Tuning will search through appointed frequencies to
find available channels.
• Frequency: Press the / button to select Frequency: Auto or enter digital
numbers.
• Modulation: Press the / button to select Modulation: Auto, 16QAM, 32QAM,
64QAM, 128QAM, 256QAM.
• Symbol: Press the / button to select Symbol Rate: Auto or enter digital
numbers.
• Network ID: Press the / button to select Network ID: Auto or enter digital
numbers.
• Search: Completion of the above settings and press the OK/
auto searching.
/ button to
/ button to
button to
: Manual store for digital
button to select channel.
/ button to select tune type: DTV+ATV, DTV, ATV.
/ button to select Operator.
/ button to select country.
)
20
button to start the