Brandt B4302UHD LED Manuel D'utilisation page 26

Menu Operation
Program Edit
Press the / buttons select the Programme Edit,
then press the OK button to enter sub-menu.
1. Press the / button to select a channel.
2. Press the
preceding page.
3. Delete: Press the RED button to delete the channel.
Skip: Press the BLUE button to skip the channel.
(Your TV set will skip the channel automatically
when using
Move: Press the YELLOW button to set the channel
to moving state, and then press the
move it to the position you want to put.
Favorite: Press the QMENU button to set the
favorite channel.
Press the / buttons select the BISS Channel List, then press the OK button to
enter sub-menu.
Press the RED button to delete the BISS programme.
Press the GREEN button to edit the BISS programme.
Signal Information (In DTV mode): Display the current Signal Information.
CI Information (In DTV mode): This function enables you to watch some encrypted
services (pay services). Please insert CI card into the CI slot according to the arrow
on the CI card.
NOTE:
The function can only be gotten when CI slot is available.
This OSD is only for illustration and the menu options and screen format will vary
according to the Digital pay services provider.
It is possible for you to change CI (Common Interface) menu screen and service by
consulting your dealer.
Please do not insert or pull out the CI card when power on.
Do not insert or pull out the CI card frequently so as to avoid any damages of the
TV and the CI card.
During initialization of the CI card, please don't operate the TV.
button to select the following or
to view the channels.)
Switch the Dynamic Rescan function On or Off.
/ buttons to
23