SilverCrest HG02124A Instructions D'utilisation Et Consignes De Sécurité page 9

become damaged, the product
can no longer be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must al-
ways be replaced with original
spare parts. Only by using origi-
nal spare parts can you ensure
that safety requirements are
met.
Connect the plug-in mains
adapter to an outlet which is
well within reach.
Never use the product unsuper-
vised and only use it in ac-
cordance with the information
stated on the type plate.
Connect the supply cord to the
product before inserting the
plug-in mains adapter into the
socket.
The tips of the attachments are
sharp.
Switch off the product before
attaching or switching the at-
tachments, as well as before
cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product if you
have an open wound, cut, sun-
burn or blister.
Avoid the danger of
damage to property
Electrical products may pose a
hazard to animals. Animals can
also damage the product. Al-
ways keep animals away from
electrical products.
Protect the product from moisture,
drops of water and splashing
water.
Ensure that the supply cord
does not get stuck in cupboard
doors and that it is not pulled
over hot surfaces. This could
damage the supply cord's
insulation.
Use the original accessories
only.
Do not place the product on hot
surfaces, near hot surfaces or
near an open fire.
To prevent impermissible heating
do not cover the plug-in mains
adapter and the product during
use and charging.
Do not use any corrosive or
abrasive cleaning agents.
GB/IE/NI 9