Télécharger Imprimer la page

Fracarro D-MATRIX-4S FTA Instructions D'emploi page 27

Publicité

Les langues disponibles

Les langues disponibles

In the second table "Deleted PID list", certain PID can be deleted from the output mux by directly writing the PID to delete in the space, add it to
the list
and select the input (INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). Later the deleted PID can be reinstated
from the deleted PID list.
NB: click on "Apply" to make the changes effective.
By clicking on the "MUX Advanced Configurations" key, the following screen opens:
This screen in the figure 12 is used to set the following parameters:
Time reference: to give a synchronisation time reference by selecting INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). (e.g. time, EPG, etc.)
Enabled LCN: enable by flagging the box or deactivate the LCN and then order the programs according to their assigned priority.
Auto SID Remapping: if enabled this innovative function allows automatically resetting a new progressive SID to the programs and to change
the list.
Auto program name: if enabled this innovative function allows automatically resetting a new progressive name to the programs by writing it
in the space (base name), e.g. program 1, program 2, etc.
Auto LCN: if enabled this function allows setting a base LCN number that is assigned to the first program in the list, the following ones will
then be set automatically in a sequence from the base number.
LCN country: select the country for setting the LCN.
After, certain advanced signal parameters can be viewed: Original Network ID, Network ID, and the Private Data Specifying Descriptor.
Other parameters like Transport Stream ID, Network Name, Cell ID can be set and changed by writing the new number in the space.
NB: click on "Apply" to make the changes effective.
From the menu CONFIGURATIONSETTINGS the general system configuration page can be opened.
Fig. 10
Fig. 9
5.1.5 SETTING CONFIGURATION
In this menu you can:
• Rename the system
• Change the access password
• Display the installed software version
• Change the network connection settings.
27
Operating instructions
and therefore removed

Publicité

loading