Fracarro D-MATRIX-4S FTA Instructions D'emploi page 26

In the first table certain program parameters can be changed, by writing directly in the space, such as: name, provider, SID, the PMT PDI. When
a parameter has been changed it can be reset (returned to the original shown in the second column) by clicking on the arrow U on the right of
the change space. The last parameter in the list opens a dropdown menu to select how to set the program so that it is declared as free to air or
encrypted by the decoder:
• always automatic: the program is declared as free to air automatically
• always yes: the program is always declared as free to air
• always no: the program is always declared as encrypted
• unchanged: the program is declared free to air if it is not changed
The second table is to manage the PID list. It can be changed by writing in the following PID in the space: PCR video stream, audio stream, teletext,
MHP, application information table. In the last column in this table, by clicking on the symbol certain actions can be taken with each program PID:
to delete the PID (the entire line for the deleted PID is highlighted in grey),
to reinstate the PID.
to change the PID.
NB: click on "Apply" to make the changes effective.
The keys for the advanced configuration of the PIDs of the selected MUX are positioned under the OUTPUT table. By clicking with the mouse on
the "MUX PID configuration" key, the following screen opens:
In the figure 11, with the table "Added PID list" you can: write the PID to add which is shown under the column "remapped value", select the signal
input (INPUT 1, INPUT 2, INPUT 3, INPUT 4, USB). Other actions are also possible: add the PID
remapped value of the added PID and reset the changed PID
Fig. 7
Fig. 8
.
26
, delete the added PID and change the