Fracarro D-MATRIX-4S FTA Instructions D'emploi page 19

Operating instructions
Example of installation
PENTA85
UX-QT LTE
SWI4404
ELIKA
D-MATRIX 4S FTA
DTT MIX IN LAN
Factory
reset
To the distribution USB drive
PC
The inputs support DVB-S/DVB-S2 satellite signal reception, they are able to provide remote power feed to an LNB and support the DiSEqC,
release 1.0, control management. The signal can be provided to each input independently, using the four upper connectors, or the loop-through
function can be used, which enables providing a signal received from one of the subsequent inputs in cascade. In this case, the cascade inputs
cannot have the reception polarity/band specified, because the signal that can be used will be the same as the input used as source for the loop.
19