TESTO 416 Mode D'emploi page 29

Performing a multi-point mean calculation:
>
Hold, Max or Min are not activated.
ü
Press
1
- Mean is lit.
- The number of readings recorded is displayed
in the upper line, while the current reading is
displayed in the lower line.
Option:
To change between displaying the flow velocity
(m/s, fpm) and the calculated volumetric flow rate
3
(m /h, l/s, cfm): Press
To include readings (in the desired quantity):
2
Press
To end measurement and calculate the mean value:
3
Press
- Mean flashes. The calculated spot mean value
is displayed.
To return to measurement view: Press
4
Performing a mean calculation in time:
>
Hold, Max or Min are not activated.
ü
Press
1
- Mean is lit.
- The elapsed measuring time (mm:ss) is displayed
in the upper line, while the current reading is
displayed in the lower line.
Option:
To change between displaying the flow velocity
(m/s, fpm) and the calculated volumetric flow rate
3
(m /h, l/s, cfm): Press
To start measurement: Press
2
To interrupt/continue measurement: Press
3
time.
To end measurement and calculate the mean value:
4
Press
- Mean flashes. The calculated mean value in
time is displayed.
To return to measurement view: Press
5
.
(several times).
.
twice.
.
6. Measuring 29
.
.
.
.
.
each