Safety Advice - TESTO 416 Mode D'emploi

1.

Safety advice

This chapter gives general rules which must be followed
and observed if the product is to be handled safely.
Avoid personal injury/damage to equipment
Do not use the measuring instrument and probes to
measure on or near live parts.
Never store the measuring instrument/probes together
with solvents and do not use any desiccants.
Product safety/preserving warranty claims
Operate the measuring instrument only within the
parameters specified in the Technical data.
Always use the measuring instrument properly and for
its intended purpose. Do not use force.
Do not expose handles and feed lines to temperatures
in excess of 70 °C unless they are expressly permitted
for higher temperatures.
Temperatures given on probes / sensors relate only to
the measuring range of the sensors.
Open the instrument only when this is expressly
described in the documentation for maintenance and
repair purposes.
Carry out only the maintenance and repair work
that is described in the documentation. Follow the
prescribed steps when doing so. For safety reasons,
use only original spare parts from Testo.
Ensure correct disposal
Take faulty rechargeable batteries/spent batteries to
the collection points provided for them.
Send the product back to Testo at the end of its
useful life. We will ensure that it is disposed of in an
environmentally friendly manner.
1. Safety advice 19