Programming Of M-Bus Address (Optional); Radio (Optional) - Zenner C5-CMF Notice D'installation Et D'utilisation

Programming of M-Bus address
(optional)
Select of the display „Adr 000" in
■
level 3 (same for the additional
inputs „Adr1" to „Adr3").
Press the button for about 2
■
seconds (until the door symbol
reappears) and then release. The
right digit starts flashing. With
one short push the value of the
digit is incremented.
With each long press, the selected
■
value will be taken over and
change to next digit (as soon as
desired character flashes, release
the button).
If the desired value is reached,
■
you have to press the button
until the number stops flashing
and the return to the menu is
completed. Now the new value is
programmed.
The programming process can be
■
repeated if necessary.
Note: If the editor is not terminated,
maybe changed values are being
saved after the automatic return to
the main display.
24

Radio (optional)

General information
zelsius®-energy meters which have
an integrated radio interface with an
antenna are marked for better visibil-
ity on the upper cover with one of the
following symbols:
wM-Bus
®