General Characteristics - Cembre BTEPD2 Notice D'utilisation Et Entretien

FIG.11
LONGITUDINAL SECTION
COUPE LONGITUDINALE
SCHNITTZEICHNUNG
SECCION LONGITUDINAL
SEZIONE LONGITUDINALE
05
%
04
03
02
01
27
Serial number
Numéro de série
Seriennummer
Número de serie
Numero di matricola
25
BATTERY OPERATED HYDRAULIC TOOL
06
The hydraulic tool is powered by Li-Ion battery. A balanced tool for optimum control; quiet in
operation with very little vibration; the lightweight construction enables the operator to hold
the tool in one hand.
The residual battery capacity level is automatically displayed after every cycle.
The part reference "BTEPD2 or BTEPF2" includes the following:
– Basic tool complete with battery, wrist strap and shoulder strap
– Spare battery
– Battery charger
– Plunger
– Gauge
– Canvas bag, ref. "009"

1. GENERAL CHARACTERISTICS

TOOL TYPE:
Application range:
Installation force
Rated operating pressure bar (psi):
Dimensions LxLxA
Weight with battery
Motor - direct current:
Battery
Battery charger supply
Recommended oil:
Plunger:
Gauge:
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L is equal to ................................................................................................................... 85,3 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662 part
st
1 Standards, and under operating conditions much more severe than those normally found, certify that
the weighted root mean square in frequency of the acceleration the upper limbs are exposed to
for each biodynamic reference axis does not exceed 2.5 m/sec
2
BTEPD2
suitable for installing AR... electric contact bush for
railway industry applications.
55 (6.6)
kN (sh ton):
600 (8,700)
1182 x 94 x 302 (46.5 x 3.7 x 11.9)
mm (inches):
4,2 (9.2)
kg (lbs):
Volt DC:
14.4 V / 3.0Ah Li-Ion
Volt / Ah:
220 240 / 50 -60
Volt / Ah:
AGIP ARNICA 32 or SHELL TELLUS TX 32 or equivalent
n. 1 OG 13.2T
CAL 19.20
the tool is provided with a max pressure valve.
-15°C a +40°C (+5°F a +104°F)
is equal to ....................................................................................... 75 dB (A)
pA
is ........................................................................... < 130 dB (C)
pCPeak
2
ENGLISH
BTEPF2
14.4
n. 2 OG 10.5
CAL 135.145
.