ENGLISH
26
Technical Data
Petrol Lawnmower .........................................460 4 IN 1 ..........................510 4 IN 1.........................561 S-Plus
Art. No ...................................................................................... 95333 .........................................95347 .........................................95350
Contents ...................................................................123 cm
Motor output .............................................2,6 kW (3,5 PS) ........................2,7 kW (3,7 PS) ........................3,8 kW (5,1 PS)
Idle speed ............................................................2900 min
Cutting width ......................................................... 456 mm .................................... 508 mm .....................................550 mm
Collection bag capacity ...............................................65 l ..............................................65 l ..............................................65 l
Fuel ................................................................ benzin bleifrei ........................ benzin bleifrei .........................benzin bleifrei
Weight ........................................................................ 30,8 kg ...................................... 33,1 kg .......................................35,9 kg
Dimensions ............................................... 1520 x 560 x 990 mm .......... 1550 x 560 x 950 mm ...........1660 x 560 x 960 mm
Noise and Vibration Information
Sound pressure level L
Sound power level L
Wear ear protectors!
Vibration emission value a
Uncertainty K=3 db (A),
1)
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
delivered items
1
Collection bag
2
Spark plug wrench
3
bowden clamps
4
Accessories
Specified Conditions Of Use
The mower has been designed for cutting grass and
grass areas with a maximum climb of 20° in private
gardens around the house and in garden colonies.
............................. 83,4 db (A) ............................... 83,5 db (A) ................................84,5 db (A)
1)
pA
.....................................96 db (A) ...................................96 db (A) ................................... 98 db (A)
1)
WA
....................................4,131 m/s
2)
h
Uncertainty K=1,5 m/s
2)
Read and understand the
operating instructions before using
the appliance. Familiarise with the
.....................................140 cm
3
................................2850 min
-1
.....................................6,9 m/s
2
2
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Use the appliance only outside, never use it
in confined and bad ventilated areas.
The mower must not be used for cutting
bushes, hedges and thickets, for cutting and
mulching creepers or lawns on roofs or in
balcony boxes. The mower must also not be
used as a crusher for mulching tree cuttings and
hedges or levelling any terrain roughness.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
This device is not intended for use by persons (inclu-
ding children) with limited physical, sensory or mental
capabilities or without the necessary lack experience
or knowledge unless they are supervised by a person
who is responsible for their safety or were instructed
by that person in how to use the device.
.....................................173 cm
3
................................2850 min
-1
...................................8,91 m/s
2
3
-1
2