switel DFT 137 Série Mode D'emploi page 84

Preparing the Telephone
Inserting the battery pack
Slide the battery compartment
cover downwards and then re-
move it. Connect the plug on the
battery pack in the socket in the
battery compartment. Insert the
battery pack in the battery com-
partment. Only use the battery
pack supplied. Pay attention that
the cable is not jammed. Replace
the cover back on the battery com-
partment and slide it upwards until
it snaps into place.
Charging the battery pack
Before the handset is used for the first time, insert it in the
base station/charging station for at least 16 hours.
When the handset is properly inserted in the base station / charging
station, the charge control lamp lights up. The handset warms up dur-
ing the charging process. This is normal and does not represent a
risk. Do not charge the handset with charging units from other manu-
facturers. The current battery charge status is indicated in the dis-
play:
Full
84
72
2/3 Full Low
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 92 for the se-
quence of menu option selections.
Private branch exchanges
The information on Page 90 explains how to install your telephone in
a private branch exchange.
Low−radiation operation (ECO mode)
In talk mode, radiation is reduced depending on the distance between
the handset and base station.
Empty