Control Panel - Zanussi ZDF2030 Notice D'utilisation

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 Programme knob
2 Start/cancel button (Start/Cancel)
3 Delay start button(Delay)
4 Indicator lights
5 On/off indicator light
End-of-programme
1)
Salt
48
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
Comes on when the washing programme is completed. Auxiliary
functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Comes on when it is necessary to fill the salt container. Refer to the
chapter 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to
stay on for some hours. This does not have an unwanted effect on
the operation of the appliance.
5 4
1 2 3