ETNA KI130ZT Mode D'emploi page 31

OPERATION
Switching on the cooking-timer, activating and switching off
• Touch simultaneously the minus (-) and plus (+) key.
▷ If you have switched on a cooking zone prior to this, the
accompanying display will be brighter.
▷ The cooking-timer that you have now set applies to this cooking
zone. The decimal point next to the power level means that the
time has been activated for this zone.
▷ The alarm can also be activated without a cooking zone being
selected. Two flashing decimal points indicate that the alarm is
counting down.
3. Set the cooking time using the minus (-) or plus (+) key.
▷ When you touch the minus (-) key, the time will be set for
30 minutes.
▷ If you keep the plus (+) key touched the time will run faster.
▷ The time can be set to a value between 01 and 99 minutes.
The cooking-timer can be set for each cooking zone.
4. Check the remaining time by selecting the cooking zone concerned
while simultaneously touch the minus (-) and plus (+) keys.
5. Adjust the cooking time using the minus (-) or plus (+) key.
▷ After the set time has ended the '00' will flash in the display, as
well as the timer's decimal point.
▷ Furthermore you will hear a repeated short beep.
6. Switch off the timer and alarm signal by touching a random key.
▷ If you don't do this, the signal will switch off automatically after
three minutes.
EN 13