Télécharger Imprimer la page

Princess 01.182070.01.001 Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Program setting:
Activate the desired program by touching the program symbol,
it's activated when the symbol starts flashing.
Touching the same symbol again will cancel the selection.
See for presetting information the table below:
Program
Temperature
Fries
200°C
Steaks
180°C
Bake
175°C
Pizza
160°C
Bread
160°C
Shrimp
160°C
Fish
160°C
Chicken
185°C
Rotisserie
200°C
Dehydrating
30-80°C
The cooking time depends on the thickness of the food. Times
can also vary due to the quantity and consistency of the food.
The time settings are only guidelines and can be adapted to your
taste. Double the time for tough meat and extend the time by at
least 20% for deep-frozen food.
Make sure that meat and poultry are thoroughly cooked before
serving.
To change the temperature or cooking time of a selected
program, touch the temperature and time setting buttons, the
same as for manual setting and set a new value.
Cooking time
15 minutes
25 minutes
30 minutes
30 minutes
20 minutes
12 minutes
20 minutes
40 minutes
30 minutes
2H-24H
Successively illuminating operating lamps indicate that the device
is operating. If operation is interrupted, they flash.
If the rotating basket or rotating spit are used, touch the
to start the rotating function. Touching the button again will stop
the rotating function.
Switch on the light pushing the
the food during use or open the door, the light will switch on and
the operation is interrupted automatically. Operation is resumed
once the door is closed again.
After the cooking time has elapsed, the device switches off
automatically and it will give a beep sound. If the device must be
stopped prematurely, press the on / off switch. To switch the
device off completely, press and hold the on / off switch until the
display goes out.
Open the door and take the cooked items out of the device.
Always use oven gloves and use the removal handle/tool to take
out the accessories.
After use, remove the mains plug from the wall socket.
Allow the used accessories and device to cool down and then
clean them.
Instruction manual
button
EN
button to check the condition of
7

Publicité

loading