Gas Connection; Adjustments - Lamborghini Caloreclima EM 16/2-E Notice D'installation Et D'entretien

Masquer les pouces Voir aussi pour EM 16/2-E:

Table des Matières

Les langues disponibles

GAS CONNECTION

The system must be equipped with all the accessories required by current regulations. We

recommend the following: always include a filter, do not apply mechanical strain to the com-

ponents and, therefore install a flexible joint as well as a pressure stabilizer and an intercep-

tion cock at the heating system inlet. The pipes must be laid using rigid pipes. Any flexible

pipes must be type approved. Also bear in mind the necessary space required for carrying

out maintenance operations on the burner and the boiler.

After fitting the valve unit on the burner, check that there are no gas leaks during the first

ignition stage.

COMBUSTION HEAD ADJUSTMENT

EM 16/2-E - EM 16/2-L-E

Adjust the combustion head by acting on the

screw A according to the indications shown on the

index.

COMBUSTION HEAD ADJUSTMENT

EM 26/2-E

- Loosen the knobs B.

- Acting on these modifies the position of the

draught tube with respect to the combustion

head. Lining knobs up with values 1, 2 or 3

gives minimum, medium and maximum burner

delivery respectively.

- Once adjustment has been completed tighten

the knobs B.

Reference index

Table des Matières

Table des Matières

Em 16/2-l-e Em 26/2-e