Gas Connection; Adjustments; Combustion Air Adjustment; Combustion Head Adjustment - Lamborghini Caloreclima EM 3-E Notice D'installation Et D'entretien

Masquer les pouces Voir aussi pour EM 3-E:

Table des Matières

Les langues disponibles

GAS CONNECTION

The system must be equipped with all the accessories required by current regulations.

We recommend the following:

always include a filter, do not apply mechanical strain to the components and, therefo-

re install a flexible joint as well as a pressure stabilizer and an interception cock at the

heating system inlet. The pipes must be laid using rigid pipes. Any flexible pipes must

be type approved.

Also bear in mind the necessary space required for carrying out maintenance opera-

tions on the burner and the boiler. After fitting the valve unit on the burner, check that

there are no gas leaks during the first ignition stage.

Adjustment of combustion air is effected from

the outside of the cover. After loosening screw

A act on air adjustment screw B refer to the

label. Once adjustment has been completed

block screw A.

Adjust the combustion head by acting on the screw C according to the indications

shown on the index.

Reference index

Table des Matières

Table des Matières

Em 6-e Em 9-e