Publicité
Les langues disponibles
Les langues disponibles
Getting
Started
Start
Before you begin:
• The Smart Flow Roller requires four (4)
high-quality, alkaline, AA size batteries.
• Make sure the type of paint you use can
be cleaned with either mineral spirits (for
oil-based paints) or a warm water and soap
solution (for latex paints).
• It is a good idea to have drop cloths
protecting your floors and furnishings in
case of accidental spatters.
Batteries may explode or leak and
cause skin burns if recharged,
disposed of in fire, mixed with a
different battery type, inserted backwards or
disassembled. Replace all batteries at the
same time with new batteries. Do not carry
batteries loose in your pocket or purse. Do
not remove battery label.
imPORtant: Some oil-based paints
require a stronger cleaning solution than
mineral spirits and should not be used with
the Smart Flow Roller. Using a cleaning
solution stronger than mineral spirits may
cause damage to the Smart Flow Roller.
Check with your paint supplier to be sure
the oil-based paint you have can be cleaned
with mineral spirits.
Questions?
Call Wagner Technical Service at:
1-800-760-3844
Monday - Friday
8:00 am to 4:30 pm CST
English
Parts and Components
Spatter
guard
Roller
Roller
core
cover
Fill tube
Assembly
1
2
1. Install batteries.
2. Lubricate the
Remove plastic bag
plunger O-rings with
from plunger.
petroleum jelly.
5
5. Attach the roller cover assembly to
the roller arm.
2
Roller arm
assembly
Head
Roller cap
Quick-release
tabs
Fill valve
Standard
container lid
3
3. Insert the plunger into the main
tube. make sure O-rings do
not twist or cut.
6
6. Press the quick-release tabs on the
unit and attach the roller arm.
Non-standard
container lid (not
included with
all models)
Main
tube
Motor housing
Motor switch
Locking
collar
Manual
override
lever
Plunger
4
4. Tighten the locking collar.
7
7. If painting a ceiling, attach the
spatter guard.
Publicité
