Trimming Outboard Motor - Yamaha F40C Manuel D'utilisation

GB
EMU01412
TRIMMING OUTBOARD
MOTOR
The trim angle of the outboard motor
helps determine the position of the bow
of the boat in the water. The correct trim
angle will help improve performance and
fuel economy while reducing strain on the
engine. The correct trim angle depends
upon the combination of boat, engine,
and propeller. Correct trim is also affected
by variables such as the load in the boat,
sea conditions, and running speed.
w
Excessive trim for the operating condi-
tions (either trim up or trim down) can
cause boat instability and can make
steering the boat more difficult. This
increases the possibility of an accident. If
the boat begins to feel unstable or is hard
to steer, slow down and/or readjust the
trim angle.
NOTE:
Refer to the section "ADJUSTING TRIM
ANGLE" for instructions on usage.
q
1 Trim operating angle
000946
3-14