Care and Maintenance
Removing the Cover
WARNING!
• Never remove the buckle tongues from the harness. They cannot
be reattached after removal. If reassembled incorrectly, the child
seat may not perform as intended.
• DO NOT remove the HUGS™ chest pads from the harness straps.
Loosen the harness.
1
a Lift harness adjuster lever
b Pull both harness straps forward
Open the chest clip.
2
a Press tabs
b Pull apart
Unbuckle the harness.
3
Remove the infant body pillow
4
if necessary.
Remove the belly pad and
5
buckle.
a Lift the cover from the seat to find
the buckle strap connection.
b Remove the buckle strap by
turning the buckle retainer
sideways and routing it out of the
front buckle slot in the child seat
(Page 38).
c Slide the end of the belly pad out
from under the foam pad on the
seat.
d Pull the end of the belly pad and
buckle retainer out of the buckle
slot in the cover to remove.
34
1b
1a
2b
2a
5a
5b
5c
5d
e Turn the buckle retainer sideways
and slide the buckle out of the
belly pad.
Detach the hook and loop
6
fasteners on the head pad
from around the harness.
Raise the harness to the
7
highest position and detach
the elastic straps from the tabs
behind the harness height
adjuster.
Remove the head pad.
8
Detach the plastic hooks from
9
the bottom edge of the child
seat.
Adjust the harness to the
10
lowest position.
Detach the plastic hooks from
11
the back of the child seat
shell.
Remove the cover from the
12
shell.
Care and Maintenance
5e
6
7
9
11
12
35