Singer XL-420 Manuel D'instructions page 92

3. Select a large design or individual design elements
and arrange them in the hoop area on the screen. The
example shown uses lettering and designs from the
Design Library that is built into the software. (Additional
4. The design data is sent to the machine for sewing one
on the tool bar.
5. The grey area (#1 Hoop) is the first of the embroidery
data that is sent to the machine for sewing.
Set fabric and stabilizer into the hoop, aligning cross lines
There are two sets of markings on the inner hoop.
On each side of the hoop there is a Center Hoop line
which indicates the exact center of the hoop.
Guide lines are to be set on the horizontal and vertical
cross lines on the fabric as shown.
90
Fig. 3
Fig. 3
Fig. 3
Fig. 4
Data 1
Fig. 4
Donnée 1
Fig. 4
Datos 1
C
Guide line
Ligne Guide
Línea guía
L O V E
Data 4
Donnée 4
Datos 4
Guide line
Ligne Guide
Línea guía
Center point line
Ligne de point centrale
Línea del punto
de centro
Guide line
Ligne Guide
Línea guía
A
Data 2
Donnée 2
Datos 2
Guide line
B
Ligne Guide
Línea guía
Data 3
Donnée 3
Datos 3